carbide cove bit

punch,ISOK15A-1
uper finish grinding profile fixture, cutter mould, wear resistant parts, precision punch(super wear resistant/ high wear impact)

P20	UP35N	UP35N	N308	T1200A	TN90 TN60	NAT	CH550	GC1525	KZ205	TTI-15	CR
	AP25N	NX55	GT530	T130A	TC60	CX75	CH570	CT530	KT175 HT5	TTI-25	CM
	NX2525	AP25N	NS530	T2000Z	TN6020	CX90	CZ25	CC670	KT195M
	NX335	NX2525	AT530	T3000Z	PV90		CZ1025		KT530M
		NX335			PV7020		CH7030		PS5 HT7
					TN100M

We can produce complex, precision profile products according to drawings, samples, and requirements
ASP60C :

imported ultra high wear-resistant high-grade high cobalt powder steel, quenched:HRC70°±2°, with excellent wear resistance and impact resistance. Comparing with HSSE\HSS-AL and HSSCo, it has 4~8 times lifetime, and can guarantee uniformity and conformity rate of machined products. It is often applied in general equipment for machining various materials including Ni\Cr\Mo\Si\Ti) that are hard to machine like high alloy\heat-resistant alloy\cast iron of nickel-vanadium-titanium alloy\stainless steel. It is excellent machining tool before heat treatment. It has excellent high temperature machining and comprehensive performance, and allows higher cutting speed. The higher the hardness of machined materials, the more remarkable the effect. Because its roughness is not so good, it is not suitable for discontinuous cutting or for using under processing system of insufficient rigidity, otherwise, cutter will be hit or chipping will happen.

VRA201:

Imported ultra micro-grain diamond tungsten steel, with excellent impact-resistance and general wear-resistance. Generally applied in worse or general equipment to machine materials of lower hardness （HRC≤25°）, discontinuous cutting and worse part fixture. Conforming to ISO K25, can replace machining of materials like M42, ASP60, MPM, HSSCo10 etc, and can get 4-6 times lifetime, it has higher performance/price ration. Comparing with SKH51, it has 15-25 times lifetime and durability.

SKH4C: (a kind of high speed steel, which does not rust at all.)（Hardening treatment: HRC60°±2°）
This is super high hardness super mirror finish stainless high speed steel. It is characterized by excellent anti-rust, anti-corrosion, anti-worn (high hardness) and ideal impact resistance properties. It applies to a wide range. Its useful life is 3-6 times than normal stainless products. Moreover, AIS1440C and SUS440C are even better quality of incisiveness and much more excellent anti-worn properties. Under salt water circumstances, it's anti-rust capability could improve more than 10-20 times. Its quality is quite good and stable. we can produce extreme complex and accurate Holder profile.

HRF10:
ultra micro-grain quality carbide, has excellent wear resistance, but its impact resistance is not so good. It is applicable for medium and low speed cutting of high hardness materials(HRC45°-65°) requiring thermal refining and quenching or for various materials having higher wear resistance and non-ferrous metal. Generally it is applied in good working condition\stable cutting\excellent part fixing and continuous light machining. Corresponding to ISO K10.

MR11:
ultra micro-grain diamond tungsten steel has excellent wear resistance and ideal impact resistance. It is applicable for high speed low feed machining of various materials with HRC25°－48°. It is the ideal machining tooling for thermal refining of materials, so it is extensively applied; comparing with general tungsten steel, it has 2-4 times lifetime. Generally it is applied in good and stable working conditions, good part fixture and continuous high speed light cutting. After being coated, it has better result, can machine various materials of HRC60°. Comparing with （ISOP15-P30/K15-K30）, it is often applied in CNC equipment to machine various material  (including Ni, Cr, Mo, Si, Ti etc.) that is hard to machine like high temperature alloy\heat-resistant alloy\cast iron of nickel-vanadium-titanium alloy\stainless steel. It is excellent machining tool before heat treatment and after thermal refining. It has excellent high temperature machining and comprehensive performance, and allows higher cutting speed. (general linear speed is ≥ 120M), low feed is required. The higher the hardness of machining materials, the better the result. Because its toughness is not so good, it is not suitable for continuous cutting or for using under little shaking, jumping condition of insufficient rigidity, otherwise, cutter will be hit or chipping will happen.

We adopt various business cooperation mode either royalty or part-time, and media promotion at different time period, as well as technical support and wholesale to middle-scale or large-scale enterprises or agency, even OEM processing as per customers' requirements. From high-class products (via 6-axis/ 7-axis Blocking CNC-machine Tool (Class-AAA))to medium-class products (via 3-axis/ 4-axis Blocking CNC-machine Tool (Class-D)), different quality and price, our reliable products can replace to first-class products, and we are professional in wholesale, R&D, producing & processing, as well as design revision according to client's designs and samples of special, non-standard, abnormal shape and new products with high cost-performance ratio, also our on-demand service will decrease your comprehensive cost greatly!

Referencing to the page footer, please provide your sample and specify the detailed specification, material type, size tolerance, drawing of semi-product and finished product, applied equipment, equipment value (RMB, to judge its market value is rigid or floating), monthly consumed quantity, type of original product and its deficiency, when you make inquiry. What is the processed material and its HRC?

LZQ is possessed of cutting-edge & comprehensive production system, as well as rich producing & machining capability with different precision technology, so as to realize high efficiency application.