Brazing/solid circular saw blade seriesⅢ (Super high wear-resistance/high impact-resistantapplication)
 
Type of material：HTF10/KT121/KT301/PT40/KTA720/VTA221/VWA441/VWA431
◆. Cutting non-ferrous metal
Dia.


 Thickness
with gauge hole and pin hole



 number of tooth/pitch Maximum cutting ability
50 60 70 80 90 100 110 120 ● ■
275 2.5 25.4 12 11 10 9 8 7 90 80
315 2.5 3 25.4 14 12 11 10 9 8 100 95
350 2.8 3.5 25.4 16 14 12 11 10 9 105 100
400 3 3.5 25.4 18 16 14 12 11 10 125 115
420 3 3.5 32 19 17 15 13 12 11 135 120
450 3.5 4 40 20 18 16 14 13 12 140 125
500 4 4.5 40 22 20 17 16 14 13 165 150
570 4.5 5 50 4*18*100 26 22 20 18 16 15 170 155
610 4.5 5 80 4*22*120 32 27 24 21 19 17 16 190 175
630 4 6 80 4*22*120 33 28 25 22 20 18 17 200 185
660 5.5 6.5 80 4*12*120 41 35 30 26 23 21 19 17 215 200
710 5.5 6.5 80 4*22*120 44 37 32 29 25 22 20 18 240 220
760 6 6.5 80 4*22*120 48 40 34 30 27 24 22 245 220
810 6 6.5 80 4*22*120 51 42 36 32 28 25 23 270 240
910 6 8 80 4*22*120 54 45 38 34 30 27 24 290 260
1010 6 8 100 4*27*160 63 53 45 40 35 32 29 360 325
1120 9 100 4*30*200 70 59 50 44 39 375 346
1250 9 100 4*30*250 79 65 60 49 44 440 400
1320 9 100 4*30*250 83 69 59 52 450 410
1430 10 100 4*30*250 90 75 64 56 500 450
1530 11 100 4*30*250 96 80 69 540 480
 
★When producing in batch, we can also produce according to drawings, samples, required size Tolerance, precision, and type of material.
◆.Tooth form
Solid profile or thick-wall profile
Cutting blank
Cutting thin-wall profile
Attention:
·Be careful in transporting and installing saw blades to avoid tungsten steel tooth being hit by hardness, so as to damage the tungsten steel.
·To polish saw blade, reduce cutting speed in the first 2-3 cutting.
·To lower cutting cost, saw blade shall not be over used to damage the tooth.

 
LZQ All rights reserved © 2001-2009 TEl：021-5032-3322  Email:lzq@50323322.com ICP number: 沪ICP备09063653号