Standard ball-nose for ultra micro-grain diamond tungsten steel and end mill for aluminum (2-flute)

R No.of Flutes Series
Z		 Flute Length Series
L1（mm)		 Shank Dia Series
d（mm)		 Shank Dia Series
L（mm)		 R angle series
 α° Coating series Grades
MR11
NRB10Z
KR301
PR40
NRA61
R0.25 2 1 4 50 0 30° 无 / TiAlN / CVD ★
R0.5
 2 2 4 50 0 30° 无 / TiAlN / CVD ★
R0.75
 2 3 4 50 0 30° 无 / TiAlN / CVD ★
R1.00 2 4 4 50 0 30° 无 / TiAlN / CVD ★
R1.25 2 5 4 50 0 30° 无 / TiAlN / CVD ★
R1.5 2 6 6 50 0 30° 无 / TiAlN / CVD ★
R1.75 2 6 6 50 0 30° 无 / TiAlN / CVD ★
R2 2 8/14/4/10 6 50/70/100 0 30° 无 / TiAlN / CVD ★
R2.5 2 10 6 50 0 30° 无 / TiAlN / CVD ★
R3 2 12/15/6/16 8 50/70/100 0 30° 无 / TiAlN / CVD ★
R3.5 2 14 8 60/70 0 30° 无 / TiAlN / CVD ★
R4 2 14/20/8 8 60/80/100 0 30° 无 / TiAlN / CVD ★
R4.5 2 16 10 70/80 0 30° 无 / TiAlN / CVD ★
R5 2 18/25/10/22 10 70/75/90/150 0 30° 无 / TiAlN / CVD ★
R5.5 2 20 12 80/90 0 30° 无 / TiAlN / CVD ★
R6 2 22/30/12/26 12 75/80/100/150 0 30° 无 / TiAlN / CVD ★
R7 2 24/65 14 90 0 30° 无 / TiAlN / CVD ★
R8 2 26 16 100 0 30° 无 / TiAlN / CVD ★
★We can machining other size & special micro-diameter, profile compound tools according to drawings, samples.